KEMPER TOOL PAGE #5
6 - 23 30%
24 or MORE 40%
CLICK TO GO BACK
TO THE KEMPER #4
CLICK FOR THE NEXT
KEMPER TOOL PAGE!!!
UTILITY KNIFE and
Ideal for fine cuts on greenware, leather work,
stenciling and more, this all purpose cutting
tool has interchangeable parts with other,
standard, utility knives. The surgically sharp
blade is held firmly with a four jaw chuck,
releaseable handle. The knife has a textured
aluminum handle for a sure grip with wet
UTILITY KNIFE REPLACEMENT
These razor sharp blades are a standardized size
and fit nicely into other brands' handles. With 5 to
a pack, they are manufactured in the U.S.A.
FETTLING KNIVES (F97, F96)
Used to trim pour hole waste, remove mold marks,
carve and sculpt ceramics and greenware. F97 has
a hard tempered steel blade with the same "springy"
feel as most conventional blades. The F96 is a
softer steel blade, with much more flexibility that
allows it to bend. Both blades are 4" long and
firmly set in a hardwood handle for a total length of
HOLE CUTTER PUNCH
Excellent for cutting potpourri hole,
Christmas tree holes and more. The tubes
have spring loaded aluminum rods which
eject the clay. These punches are available
in two sizes and are made with brass tubes
set in a hardwood handle.
HCP2, 1/4" Diameter
HCP1, 3/16" Diameteter
Spend less time sharpening and more time working
on highly abrasive clay products. The "file hard"
heavy steel blade is firmly set in a hardwood
handle with a total of 7" in length.
For jobs where slim and sharp
count. Used for trimming clay, to
cutting out designs, this
semi-flexiable blade is keenly
sharpened for a smooth cut. The
stainless steel blade is firmly set in a
smooth hardwood handle for a total
length of 5".
SQUARE HOLE CUTTERS
Ideal for cutting out windows, these
cutters are designed with push out
plungers to remove clay from the tube.
Made of high quality brass with rubber
tips on the plunger for comfort.
HCS4, 1/4" Diameter
HCS3, 3/16" Diameter
HCS2, 1/8" Diameter
HCS1, 3/32" Dimeter
Use Catalog Link for Tool Prices