| Dakota Potters Supply |
605-332-1946
605-332-2729
KEMPER TOOL PAGE #1
KEMPER'S POTTERY TOOL KIT
Perfect for the beginning potter, in or out of the
classroom. Used by schools and universities
around the world, this kit is packaged in a
reusable, clear vinyl bad with pockets to keep your
tools together for travel or storage. Kit contains
one each: Loop Tool(LT5), Ribbon Tool(8R2),
Potter's Rib(RB2), Needle Tool(PRO), Wood
Modeling Tool(WT6), Sponge(SPR), Scraper(S4),
and Wire Clay Cutter(K35).
Perfect for the beginning potter, in or out of the
classroom. Used by schools and universities
around the world, this kit is packaged in a
reusable, clear vinyl bad with pockets to keep your
tools together for travel or storage. Kit contains
one each: Loop Tool(LT5), Ribbon Tool(8R2),
Potter's Rib(RB2), Needle Tool(PRO), Wood
Modeling Tool(WT6), Sponge(SPR), Scraper(S4),
and Wire Clay Cutter(K35).
K35, K36 Clay Cutter
Ideal for slicing and cutting lump clay, as well
as trimming pots and other projects on the
wheel.
Hardwood 3" toggle handles are firmly fastened
to approximately 18" of wire/line. The K35
wire is quality stainless steel while a
high-strength braided nylon cord is used for the
K36.
Ideal for slicing and cutting lump clay, as well
as trimming pots and other projects on the
wheel.
Hardwood 3" toggle handles are firmly fastened
to approximately 18" of wire/line. The K35
wire is quality stainless steel while a
high-strength braided nylon cord is used for the
K36.
DOUBLE "O" RIB(RB00)
For cutting, slicing, shaping and
smoothing soft clay.
Handcrafted and finished from
imported hardwood, this
comfortable rib is a total of
twelve inches in length.
For cutting, slicing, shaping and
smoothing soft clay.
Handcrafted and finished from
imported hardwood, this
comfortable rib is a total of
twelve inches in length.
THROWING STICKS(TS2,TS1)
Patterned from the Japanese egote, this
tool aids shaping and compressing deep,
narrow necked wheel thrown pieces.
Made in two sizes of fine hardwood that
is polished to a satin finish, these
"comfortably fitting" throwing stick are
12 1/2" in length.
Patterned from the Japanese egote, this
tool aids shaping and compressing deep,
narrow necked wheel thrown pieces.
Made in two sizes of fine hardwood that
is polished to a satin finish, these
"comfortably fitting" throwing stick are
12 1/2" in length.
DISCOUN
TS
TS
6 - 23 30%
24 or MORE 40%
MIX/MATCH FOR
DISCOUNT
24 or MORE 40%
MIX/MATCH FOR
DISCOUNT
CLICK TO GO BACK TO THE
PRODUCTS PAGE
PRODUCTS PAGE
CLICK FOR THE NEXT
KEMPER TOOL PAGE!!!
KEMPER TOOL PAGE!!!
Use Catalog Link for Tool Prices